Cabinet sandblaster with self-cleaning cartridges

sabbiatrice italjet plus

What are the advantages of FeVi Italjet PLUS sand blaster?

“ PRESSURE “ sandblasting system
FeVi Italjet PLUS sand blaster uses a "pressure" system to propel the abrasive. The abrasive is propelled by a special gun which is connected to a tank containing aggregate, by an abrasion resistant pipe. Delivery pressure of the tank generates the abrasive push throughout the pipe up to the gun; the abrasive comes out of the gun shaping a continuous, high-power and large-scale jet. (about 4/5 times higher than a corresponding standard vacuum sand blaster).

Abrasive recycling
In the rear, FeVi Italjet PLUS sand blaster is provided with a system called cyclone constantly recovering and removing the abrasive used. It is a two-way suction cyclone allowing to work with a wide range of abrasives.

Filtering process
FeVi Italjet PLUS pressure sand blaster is provided with a filtration system with self-cleaning cartridges. Filtering devices are made of polyester, instead of paper, hence extremely solid. Timed cleaning occurs by a system of automatic blow moulding.

Quality of the system and of the components
Each detail of FeViItaljet sand blaster is treated with the utmost care: a search for the best components ensures the best working conditions and safety for the operator, both in terms of structure and reliability.

Minimum dimensions
Although concerning an industrial system, FeVi Italjet PLUS sand blaster dimensions take up the minimum space required. Thanks to the maximum compactness of the two units, it is always easy to find it a dedicated area in the work environment.



Work area mm:


Working plane height mm 850
cabinet kg
cyclone kg
filter kg


Filtrating surface square meters 15
Air pressure consumption lt/1' 1500/-1450
Standard vacuum power HP 4
Power Kw




Made of an appropriate thick and, if necessary, reinforced steel plate to achieve a solid product free from deformation. Painted with baked epoxy: particularly resistant to abrasion. Provided with:
- sandblasting steel-structured gun with tungsten carbonide nozzle (widia) with a 4mm hole.
- blow gun to dust pieces after treatment.
- side door to fix the structure carrying objectholder disc.
- interlocks for safety preventing from sandblasting gun operation when door is open.
- operating position provided with
                window with laminated safety glass protected by aluminium barrel reinforcing mesh.
                abrasion resistant gloves with gauntlets.
                sandblasting gun pedal 
- 150 W halogen lamp to light work area
- front-side control panel on upper cap All electrical devices are on panel 
                voltage warning signal
                start push and vacuum arrest buttons
                ignition switch of cabinet light
                insufficient suction warning signal
- compressed air system provided with:
                a three-way electric power supply valve . One-way allows electric power supply, and the other one blocks it simultaneously causing all machine circuits discharge.
                automatic discharge filter/dehumidifier
                pressure regulator with pressure gauge
- suction control instrument (vacuum switch). The tool prevents sandblasting gun from operating in case of insufficient suction in cabinet. A warning signal on electrical device panel indicates its activation.
- abrasion resistant rubber sheets on walls inside work area.


Device provides for constant recovery and dust removing of abrasive. 360-SK model, a two-way suction device, provided with:
- regulating suction devices.
-  abrasion resistant rubber internal coating, 6 mm thick in abrasive circulation area.
- mesh filter to spot possible rough residues.
- abrasive loading door.
Cyclone setting allows to work with a wide range of abrasives and to achieve effective dust removing.

Capacity of 24 litres and provided with all valves and controls for functioning, in particular:
- excess pressure safety valve
- abrasive flux regulating valve provided with decimal scale sector
- compressed air flux regulating valve provided with decimal scale sector
- air abrasive mixer valve
- rapid depressuration valve. Valve rapidly discharges pressure from tank, immediately arresting sandblasting when the operator releases the pedal.
When work process stops, abrasive is automatically refilled in tank, which takes approximately 15 seconds.                             

Provided with self-cleaning cartridges and with a cleaning automatic system of filtering areas.  F2C-9 filter model provided with 2 filtering cartridges. Total filtering area: 9 m2. Filter is provided with high head vacuum (1.5 HP).                                                              
Filtering cartridges technical specifications
                Made of polyester, highly resistant to possible mechanical vibrations.
                Large and non deep folds to avoid dust compression on surface. Compression occurs when narrow and deep folds are used to work large surfaces with smaller size cartridges.

At 6 bars with a 4mm nozzle, consumption is about 1100 litres/1'. At a lower pressure, consumption proportionately decreases.

three-phase 400 Volts, 50 HZ,   with approximately 24 Volt auxiliary circuits. The system is worked out according to the best technique and with components of ensured quality. All cables are identifiable according to instructions provided in wiring diagram.  About 1,5 kW total power draw.

Support disc for wheel rims, mounted on door (with manual rotation). Provided with sealed bearings and a 600mm diameter. Maximum load kg 30. Disc is mounted with a 30° inclined axis to the vertical plane. The inclination allows an easily reachable position to work on the whole rim.





Vous trouverez ici les réponses aux questions les plus fréquemment 
posées sur le monde  du sablage.



Le nouveau canal vidéo de formation gratuit pour mieux connaître le monde des sableuses.



Sign up for our educational webinars, digital fairs and more.





Copyright 2000 - 2019 © Fe.Vi. SRL unipersonale P.IVA 02452730340